Facts
around HP plus family
Precision: Constant concentricity and repeatable accuracy 3μm
at distance 3xD(max. 50mm)
Simple: Clamping by means of a hexagon T-Key opening by means of
ejecton mechanism (no eccentric) to get the best precision.
Unique: The precision collets HP＋ has a surface roughness
of ＜Rz 1.5 um on the external contour makes it possible the highest
level of reproducible accuracy and damps potential vibratory from
the machine when working on the material which has higher than 300N
clamping forces.
The clamping type of HP toolholders have the highest precision and
unbeatable strength than any other toolholders which are suitable
and trustable table toolholder, so we call it "HP Plus"
family
Safety:
If it is ensured that the diameter of the collet is suitable to
the shank of the cutting tool and the operating manual is observed,
it's not necessary to additionally check the clamping force.
Cleaning:
Always pay attention to the precision tools, be sure to remove dirt,
chips, and oil before using.
|
